PostGIS is a set of extensions for the PostgreSQL database. With PostGIS you can store geospatial data and perform spatial queries on a postgres database.
Unlike the default datatypes on a normal postgres database, spatial data has to be handled differently. The queries you can perform on a spatial database are usually defined by bounding-boxes in 2 or 3 dimensions. To store, index and handle these datatypes postGIS uses a concept called R-Trees, wich is not part of the default postgres-installation.
With a postGIS database, you are able to:
|Latest Feature Releases||Official Documentation||Release Date|
An official pacman-package is available. Install the package as root, using:
pacman -S postgis
In order to use the openSuse repositories for geospatial applications, enable the Geo-repository as root:
zypper ar http://download.opensuse.org/repositories/Application:/Geo/openSUSE_[RELEASE]/ GEO
where [RELEASE] is the official release number of your Suse-distribution. After this, you can install postgis with:
zypper install postgis
This guide is explicitly for PostgreSQL 9.1 or higher on linux machines. It uses the postgres extensions-feature that will greatly improve the import of extensions to an existing postgres-installation. If you have to work with an older version of postgres, please refer to the official documentations.
PostGIS is a complex project that has a number of dependencies. In order to proceed with the manual configuration and build procedure, you will have to resolve these dependencies and install the following packages either manually or via the package-managers.
Get the Sources
In order to get the source code, download the latest tarball:
wget http://postgis.net/stuff/postgis-2.3.2dev.tar.gz tar -xvzf postgis-2.3.2dev.tar.gz
or use the official SVN-repository:
svn checkout http://svn.osgeo.org/postgis/trunk/ postgis-2.3.2dev
If you obtained the sources via SVN, you can prepare the config-script with:
In order to configure the build-process for your specific machine, run in the project folder:
There are several optional parameters for the configuration-step. Please refer to the official documentation for detailed instructions, this is usually optional and only for servers that use non-default installations.
Once the configuration-step has finished successfully, a makefile will be created. To start the build-process run:
The last output should be:
"PostGIS was built successfully. Ready to install."
As of version 1.4.0, all the functions have comments generated from the documentation. If you wish to install these comments into your spatial databases later, run the command which requires docbook.
Install all extensions with:
The PostGIS extensions are built and installed automatically if you are using PostgreSQL 9.1 or higher. You can install the necessary extensions manually, if you have different setup.
In the project folder:
cd extensions cd postgis make clean make make install cd .. cd postgis_topology make clean make make install cd .. cd postgis_sfcgal make clean make make install cd .. cd address_standardizer make clean make make install make installcheck cd .. cd postgis_tiger_geocoder make clean make make install make installcheck
If you want to install the extensions manually on a different machine, copy the following files from the
extensions folder into the
PostgreSQL/share/extension-folder of the target. For each extension:
scp extensions/[EXTENSION]/sql/*.sql user@target:[POSTGIS_PATH]/share/extension
where [EXTENSION] is the selected extension (postgis, postgis_topology, postgis_sfcgal, address_standardizer, postgis_tiger_geocoder) and [POSTGIS_PATH] is the PostGIS installation-path on your target-machine.
Verifiying the Installation
If you don't have a running postgres database service, setup your postgres database first. Connect to the database, using:
su postgres -c psql
To verify that the extensions are accessible, run the following queries in a psql-session:
SELECT name, default_version,installed_version FROM pg_available_extensions WHERE name LIKE 'postgis%' or name LIKE 'address%';
The output should look like this:
name | default_version | installed_version ------------------------------+-----------------+------------------- address_standardizer | 2.3.2dev | 2.3.2dev address_standardizer_data_us | 2.3.2dev | 2.3.2dev postgis | 2.3.2dev | 2.3.2dev postgis_sfcgal | 2.3.2dev | postgis_tiger_geocoder | 2.3.2dev | 2.3.2dev postgis_topology | 2.3.2dev | (6 rows)
To perform an in-depth post-installation test, run the following command in your project-folder:
This will run through various checks and tests using the generated library against an actual PostgreSQL database.
To create a new empty database, run as postgres-user:
Connect to the database with a psql-session:
psql -d [yourdatabase]
In the psql-session run:
CREATE EXTENSION postgis; CREATE EXTENSION postgis_topology;
to create the neccesary geospatial extensions. Once this is done, the database is a geospatially enabled database and it is ready to use.
In this example we will set up a geospatial database, import data from 2 different sources, and view the results in an application called QGIS. This guide is explicitly written for linux-machines, if you operate on another platform, some commands or paths might not work as expected.
In order to view the imported data we will use an application called QGIS. If you don't have this application, please install it first, if you like to use another viewer or geo-application (like ArcGIS) you can skip installing QGIS.
Our Sources will be the New York City State Assembly Districts and the New York City LION Street Map Database. Please Download the appropriate files frome the linked locations. You should also take a look at the Metadata-section of the material, since it gives you information on what coordinate reference system these files use.
To start, create a working folder "nycgis", copy the downloaded files to the location and unzip the archives.
mkdir nycgis cd nycgis cp ~/Downloads/nyad_16d.zip . unzip ~/Downloads/nyad_16d.zip cp ~/Downloads/nylion_16d.zip . unzip ~/Downloads/nylion_16d.zip
In the "nycgis" folder you should now have 2 folders: "nyad_16d", "lion" with several files.
When working with geo data it is of vital importance, to know the coordinate reference system (CRS) of your source data, and of your final output data. In the Metadata-sections of the linked locations obove (Metadata: Assembly Districts, Metadata: LION Database), you will find that the CRS for both files is EPSG:2263, a coordinate system used to reference the north eastern US.
Lets assume we want to use a different CRS in our database. This can have different reasons, we might want to work with a web-based geo application on the database for example. A common CRS for this kind of application is WGS:84 (EPSG:4326).
To convert the coordinate systems we use a tool called
ogr2ogr wich is part of the GDAL package. In the working folder, we first create 2 folders representing the reprojected data, and then convert our data.
mkdir nyad_16d_proj_4326 ogr2ogr -f "ESRI Shapefile" ./nyad_16d_proj_4326/nyad_4326.shp ./nyad_16d/nyad_16d.shp -s_srs EPSG:2263 -t_srs EPSG:4326 mkdir nylion_16d_proj_4326 ogr2ogr -f "ESRI Shapefile" ./nylion_16d_proj_4326/ny_str_4326.shp ./nylion_16d/lion/lion.gdb/a0000000d.gdbtable -s_srs EPSG:2263 -t_srs EPSG:4326
Notice that we only use the file called: "a0000000d.gdbtable" of the LION-Database for our purposes. The syntax of the
ogr2ogr-command is as follows:
ogr2ogr -f [output-format] [output-file] [input-file] -s_srs [source crs] -t_srs [target crs]
We now have 2 shapefiles, projected in the correct CRS. In order to use the data in our database, we must convert the shapefiles to sql-statemens. For this we use a tool called
shp2pgsql. In the working directory run the following commands:
shp2pgsql ./nyad_16d_proj_4326/nyad_4326.shp > nyad_4326.sql shp2pgsql ./nylion_16d_proj_4326/ny_str_4326.shp > ny_streets_4326.sql
ny_streets_4326.sql are now ready to use in postgis. To proceed, and import the data create a spatially enabled database.
sudo su - postgres createdb nycgis psql -d nycgis
In the psql-session, run:
CREATE EXTENSION postgis; CREATE EXTENSION postgis_topology;
Quit the psql- and postgres-user-sessions with (CTRL+D). And import the files with:
psql -f nyad_4326.sql -d nycgis psql -f ny_streets_4326.sql -d nycgis
nycgis has now 2 tables in wich the reprojected sources were successfully imported.
To verify this: open QGIS
Et voilà: You now have a spatially enabled database, with imported, reprojected geodata.