Commits with Git provide accountability by attributing authors with changes to code. Git offers multiple features for the specificity and security of commits. This topic explains and demonstrates proper practices and procedures in committing with Git.
|--message, -m||Message to include in the commit. Specifying this parameter bypasses Git's normal behavior of opening an editor.|
|--amend||Specify that the changes currently staged should be added (amended) to the previous commit. Be careful, this can rewrite history!|
|--no-edit||Use the selected commit message without launching an editor. For example, |
|--all, -a||Commit all changes, including changes that aren't yet staged.|
|--date||Manually set the date that will be associated with the commit.|
|--only||Commit only the paths specified. This will not commit what you currently have staged unless told to do so.|
|--patch, -p||Use the interactive patch selection interface to chose which changes to commit.|
|--help||Displays the man page for |
|-S[keyid], -S --gpg-sign[=keyid], -S --no-gpg-sign||Sign commit, GPG-sign commit, countermand |
|-n, --no-verify||This option bypasses the pre-commit and commit-msg hooks. See also Hooks|
Git will usually open an editor (like
emacs) when you run
git commit. Pass the
-m option to specify a message from the command line:
git commit -m "Commit message here"
Your commit message can go over multiple lines:
git commit -m "Commit 'subject line' message here More detailed description follows here (after a blank line)."
Alternatively, you can pass in multiple
git commit -m "Commit summary" -m "More detailed description follows here"
If your latest commit is not published yet (not pushed to an upstream repository) then you can amend your commit.
git commit --amend
This will put the currently staged changes onto the previous commit.
Note: This can also be used to edit an incorrect commit message. It will bring up the default editor (usually
emacs) and allow you to change the prior message.
To specify the commit message inline:
git commit --amend -m "New commit message"
Or to use the previous commit message without changing it:
git commit --amend --no-edit
Amending updates the commit date but leaves the author date untouched. You can tell git to refresh the information.
git commit --amend --reset-author
You can also change the author of the commit with:
git commit --amend --author "New Author <[email protected]>"
Note: Be aware that amending the most recent commit replaces it entirely and the previous commit is removed from the branch's history. This should be kept in mind when working with public repositories and on branches with other collaborators.
This means that if the earlier commit had already been pushed, after amending it you will have to
Usually, you have to use
git add or
git rm to add changes to the index before you can
git commit them. Pass the
--all option to automatically add every change (to tracked files) to the index, including removals:
git commit -a
If you would like to also add a commit message you would do:
git commit -a -m "your commit message goes here"
Also, you can join two flags:
git commit -am "your commit message goes here"
You don't necessarily need to commit all files at once. Omit the
--all flag and specify which file you want to commit directly:
git commit path/to/a/file -m "your commit message goes here"
For directly committing more than one specific file, you can specify one or multiple files, directories and patterns as well:
git commit path/to/a/file path/to/a/folder/* path/to/b/file -m "your commit message goes here"
Generally speaking, empty commits (or commits with state that is identical to the parent) is an error.
However, when testing build hooks, CI systems, and other systems that trigger off a commit, it's handy to be able to easily create commits without having to edit/touch a dummy file.
--allow-empty commit will bypass the check.
git commit -m "This is a blank commit" --allow-empty
After making changes to your source code, you should stage those changes with Git before you can commit them.
For example, if you change
git add README.md program.py
This tells git that you want to add the files to the next commit you do.
Then, commit your changes with
Note that this will open a text editor, which is often vim. If you are not familiar with vim, you might want to know that you can press
i to go into insert mode, write your commit message, then press
:wq to save and quit. To avoid opening the text editor, simply include the
-m flag with your message
git commit -m "Commit message here"
Commit messages often follow some specific formatting rules, see Good commit messages for more information.
If you have changed a lot of files in the directory, rather than listing each one of them, you could use:
git add --all # equivalent to "git add -a"
Or to add all changes, not including files that have been deleted, from the top-level directory and subdirectories:
git add .
Or to only add files which are currently tracked ("update"):
git add -u
If desired, review the staged changes:
git status # display a list of changed files git diff --cached # shows staged changes inside staged files
Finally, commit the changes:
git commit -m "Commit message here"
Alternately, if you have only modified existing files or deleted files, and have not created any new ones, you can combine the actions of
git add and
git commit in a single command:
git commit -am "Commit message here"
Note that this will stage all modified files in the same way as
git add --all.
You should never commit any sensitive data, such as passwords or even private keys. If this case happens and the changes are already pushed to a central server, consider any sensitive data as compromised. Otherwise, it is possible to remove such data afterwards. A fast and easy solution is the usage of the "BFG Repo-Cleaner": https://rtyley.github.io/bfg-repo-cleaner/.
bfg --replace-text passwords.txt my-repo.git reads passwords out of the
passwords.txt file and replaces these with
***REMOVED***. This operation considers all previous commits of the entire repository.
If someone else wrote the code you are committing, you can give them credit with the
git commit -m "msg" --author "John Smith <[email protected]>"
You can also provide a pattern, which Git will use to search for previous authors:
git commit -m "msg" --author "John"
In this case, the author information from the most recent commit with an author containing "John" will be used.
On GitHub, commits made in either of the above ways will show a large author's thumbnail, with the committer's smaller and in front:
You can commit changes made to specific files and skip staging them using
git commit file1.c file2.h
Or you can first stage the files:
git add file1.c file2.h
and commit them later:
It is important for someone traversing through the
git log to easily understand what each commit was all about. Good commit messages usually include a number of a task or an issue in a tracker and a concise description of what has been done and why, and sometimes also how it has been done.
Better messages may look like:
TASK-123: Implement login through OAuth TASK-124: Add auto minification of JS/CSS files TASK-125: Fix minifier error when name > 200 chars
Whereas the following messages would not be quite as useful:
fix // What has been fixed? just a bit of a change // What has changed? TASK-371 // No description at all, reader will need to look at the tracker themselves for an explanation Implemented IFoo in IBar // Why it was needed?
A way to test if a commit message is written in the correct mood is to replace the blank with the message and see if it makes sense:
If I add this commit, I will ___ to my repository.
git commit -m 'Fix UI bug' --date 2016-07-01
--date parameter sets the author date.
This date will appear in the standard output of
git log, for example.
To force the commit date too:
GIT_COMMITTER_DATE=2016-07-01 git commit -m 'Fix UI bug' --date 2016-07-01
The date parameter accepts the flexible formats as supported by GNU date, for example:
git commit -m 'Fix UI bug' --date yesterday git commit -m 'Fix UI bug' --date '3 days ago' git commit -m 'Fix UI bug' --date '3 hours ago'
When the date doesn't specify time, the current time will be used and only the date will be overridden.
Suppose you have many changes in one or more files but from each file you only want to commit some of the changes, you can select the desired changes using:
git add -p
git add -p [file]
Each of your changes will be displayed individually, and for each change you will be prompted to choose one of he following options:
y - Yes, add this hunk n - No, don’t add this hunk d - No, don’t add this hunk, or any other remaining hunks for this file. Useful if you’ve already added what you want to, and want to skip over the rest. s - Split the hunk into smaller hunks, if possible e - Manually edit the hunk. This is probably the most powerful option. It will open the hunk in a text editor and you can edit it as needed.
This will stage the parts of the files you choose. Then you can commit all the staged changes like this:
git commit -m 'Commit Message'
The changes that were not staged or committed will still appear in your working files, and can be committed later if required. Or if the remaining changes are unwanted, they can be discarded with:
git reset --hard
Apart from breaking up a big change into smaller commits, this approach is also useful for reviewing what you are about to commit. By individually confirming each change, you have an opportunity to check what you wrote, and can avoid accidentally staging unwanted code such as println/logging statements.
You cam amend the time of a commit using
git commit --amend --date="Thu Jul 28 11:30 2016 -0400"
git commit --amend --date="now"
If you make a commit as the wrong author, you can change it, and then amend
git config user.name "Full Name" git config user.email "[email protected]" git commit --amend --reset-author
Determine your key ID
gpg --list-secret-keys --keyid-format LONG /Users/davidcondrey/.gnupg/secring.gpg -------------------------------------- sec 2048R/YOUR-16-DIGIT-KEY-ID YYYY-MM-DD [expires: YYYY-MM-DD]
Your ID is a alphanumeric 16-digit code following the first forward-slash.
Define your key ID in your git config
git config --global user.signingkey YOUR-16-DIGIT-KEY-ID
As of version 1.7.9, git commit accepts the -S option to attach a signature to your commits. Using this option will prompt for your GPG passphrase and will add your signature to the commit log.
git commit -S -m "Your commit message"